HAND BLASTING CABINET
SMG 100 S/D
ADVANTAGES OF THIS BLAsting System:
Can be equipped with both injector and pressure jet technology.
Extremely powerful filter enables use in hard continuous or stratified operation, e.g. during revision work.
Blasting power can be precisely metered from gentle to highly abrasive.
1000 x 1000 x 1000 mm (W x D x H)
Dustproof vacuum cabin in stable sheet steel construction
Special rubber, wear-resistant, inside cotton, firmly attached to the cabin against dust
Two side doors, dust-tight closing, double-walled, sound-absorbing foamed, lockable, with electrical switch-off protection
Blasting material recovery
Via coordinated MHG recovery system
ON / OFF switch for suction and lighting, pressure regulator, manometer and foot switch
Safety glass, 500 x 320 mm, interchangeable without special tool
Wear-free mounted outside, very good illumination by halogen, optional LED lighting unit
MHG blasting guns
High-performance blast gun system MHG, with optimum efficiency, operation via foot pedal, available with nozzles in different sizes and materials
WORKPIECE BLOW-OFF NOZZLE
For cleaning the blasted workpieces and the blasting chamber
MHG pressure jet system (optional)
Available with different boiler sizes, including built-up abrasive recovery system
|Blasting nozzle diameter||Air consumption at 6 bar (l/min) Injector||Air consumption at 6 bar (l/min) Pressure beam|
|8.0 mm||910 Standard||3200|
Clearly arranged in the lamp body:
- On / Off button for light
- On / off button for exhaust fan
Both functions receive separate energy saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for suction. If the blast cabin is not used, the exhaust will switch off automatically after five minutes of lighting and after ten minutes. Both functions are reactivated by a simple press of the foot pedal without having to manually restart the blast cabin. When you open a car door, the lights are automatically turned on and the energy-saving time runs off again.
Maintenance indicator light: The control panel contains a "Maintenance" indicator light. It flashes after 1000 hours of operation and is reset by the service. By observing the maintenance intervals, the blast cabin is always kept at a technically optimal level.