Additive Manufacturing / 3-D Print

SMG 40 Rapid Ex

SMG 40 Rapid Ex

ADVANTAGES OF THIS BLAST MACHINE

  • Electrically height adjustable range up to 300 mm

  • Optional available with a tumble basket for bulk material

  • Optional available with a second Reclaimsystem for separate powdercleaning

  • Developed in collaboration with HP specialists
  • Working space = 900 x 550 x 700 mm (W x D x H)

Details

Working space

900 x 550 x 700 mm (W x D x H)

Blastroom

Dustproof vacuum cabin in stable sheet steel construction

Working gloves

Special rubber, wear-resistant, inside cotton, firmly attached to the cabin against dust

Doors

Two side doors, dust-tight closing, double-walled, sound-absorbing foamed, lockable, with electrical switch-off protection

Blasting material recovery

Via coordinated MHG recovery system

Service

ON / OFF switch for suction and lighting, pressure regulator, manometer and foot switch

Visors

Safety glass, 500 x 320 mm, interchangeable without special tool

Beam lighting

Very bright illumination by LED lighting unit

MHG blasting guns

High-performance blast gun system MHG, with optimum efficiency, operation via foot pedal, available with nozzles in different sizes and materials

WORKPIECE BLOW-OFF NOZZLE 

For cleaning the blasted workpieces and the blasting chamber / Optionally available as an anti-static blow off device with ionized air

Air consumption

Blasting nozzle diameter Air consumption at 6 bar (L/MIN)
6.5 mm 590
8.0 mm 910 Standard
10.0 mm 1340

Catalog

Standard-Maschines

 

optional equipment

optional equipment variants

  • Processing drum for small parts

Contents approx. 10 l, driven by a gear motor The operating mode "Automatic operation processing drum" or "Manual operation" can be activated. In automatic mode, the arm openings are securely closed with a hand-operated flap.On / off button for exhaust fan

  • Antistatic blowing device

Ionization of the blow-off air reliably prevents dust and abrasive particles from adhering.

  • ATEX additional equipment (use for explosive dusts)

By installing structural explosion protection, the system corresponds to the ATEX version Ex II 3 D Ex T III CT 125ºC Dc. A corresponding ignition risk analysis according to Directive 2014/34 / EU is available.

  • Second extraction system for powder removal

By pushing the operating mode selector switch, the pneumatic switchover between two cyclone separators takes place. As a result, the blasting system can also be used to de-powder the workpieces. The powder is separated in the first cyclone separator and falls into the dust bucket positioned underneath. In the second cyclone separator there is the blasting medium with which the workpiece is then cleaned or compacted.

 

Application

Typical areas of application

The system is suitable for all SLS and SLM applications, but can of course also be used for all other blasting work.

Contact

Do you have any questions about our products?

Do you have any questions or comments about our company and our products? Please use our contact form. We look forward to hearing from you!

Entries with* are mandatory for the processing of your enquiry.